HOT-ROLLED PICKLED STRIP

TUBES AND OVALS

Our company offers tubes of diametres 8.0 – 300.0 mm with wall thickness 0.5 – 3.0 mm from hot-rolled pickled, cold-rolled and galvanized strips.

Our company offers square profiles 8.0 x 8.0 mm – 80.0 x 80.0 mm and rectangular profiles 8.0 x 8.0 mm – 120.0 x 40.0 mm.

Our company offers special profiles according the inquiries of the clients.

Product aluminum tubes Allu's businesses.

STEEL FOR COLD FORMING EN 10111 DIMENSIONAL TOLERANCES ARE SUPPLIED IN COMPLIANCE WITH EN 10051 STANDARDS
MECHANICAL CHARACTERISTICS								CHEMICAL ANALYSIS %
QUALITY	NUMERICAL DESIGNATION	Re N/mm²		Rm N/mm²		A 80% min Sp<3 mm	A 5% min Sp>=3 mm	C max	Mn max	P max	S max

		MIN	MAX	MIN	MAX
DD11	1.0332	170	360	-	440	24	28	0,12	0,60	0,045	0,045
DD12	1.0398	170	340	-	420	26	30	0,10	0,45	0,035	0,035
DD13	1.0335	170	330	-	400	29	33	0,08	0,40	0,030	0,030
DD14	1.0389	170	290	-	380	32	36	0,08	0,35	0,025	0,025

CONVERSION TO THE PREVIOUS STANDARDS
EN 10111	EU 111/77	DIN 1614	NFA A 36.301
DD11	Fe P11	STW22	1C
DD12	Fe P12	RRSTW23
			2C
DD13	Fe P13	STW24	3C
DD14			3CT

STEEL FOR BUILDING AND GENERAL USAGE EN 10025-2 DIMENSIONAL TOLERANCES ARE SUPPLIED IN COMPLIANCE WITH EN 10051 STANDARDS.
MECHANICAL CHARACTERISTICS								CHEMICAL ANALYSIS %
QUALITY	NUMERICAL DESIGNATION	Re N/mm²		Rm N/mm²		A80% min Sp< 3 mm	A5% min Sp>= 3 mm	C max	Mn max	P max	S max	Si max	Cu max	N max

		MIN	MAX	MIN	MAX
S185+M	1.0035	185	-	310	540	12	18
S235JR+M	1.0038	235	-	360	510	19	26	0,17	1,40	0,035	0,035	-	0,55	0,012
S275JR+M	1.0044	275	-	430	580	17	23	0,21	1,50	0,035	0,035	-	0,55	0,012
S355JR+M	1.0045	355	-	510	680	16	22	0,24	1,60	0,035	0,035	0,55	0,55	0,012

CONVERSION TO THE PREVIOUS STANDARDS
EN 10025-2 2004	EN 10025+A1 1993	EN 10025 1990	DIN 17100	NF A 35-501
S185 + M	S185	Fe 310-0	St 33	A 33
S235JR+M	S235JRG2	Fe360 BFN	RSt 37.2
S275JR+M	S275JR	FE 430B	St 44.2	E 28.2
S355JR+M	S355JR	FE 510B		E 36.2

M = thermomechanical rolling

STEEL WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE EN 10025/5 TOLERANCES ON DIMENSION AND SHAPE IN COMPLIANCE WITH EN 10051 STANDARDS
MECHANICAL CHARACTERISTICS
QUALITY	NUMERICAL DESIGNATION	Re N/mm²		Rm N/mm²		A80% min Sp< 3 mm	A5% min Sp>= 3 mm
		MIN	MAX	MIN	MAX
S355JOWP+M	1,8945	355	-	510	680	17	22

STEEL WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE EN 10025/5 TOLERANCES ON DIMENSION AND SHAPE IN COMPLIANCE WITH EN 10051 STANDARDS
CHEMICAL ANALYSIS%
QUALITY	C max	Mn max	P		S max	Si max	Cr		Cu		N max
			MIN	MAX			MIN	MAX	MIN	MAX
S355JOWP+M	0,12	1,0	0,06	0,15	0,035	0,75	0,30	1,25	0,25	0,55	0,009

CONVERSION TO THE PREVIOUS STANDARDS
EN 10025-04	EN10155/93	EU 155-80
S355JOWP+M	S355JOWP	Fe510C 1K1

M = thermomechanical rolling

HIGH YIELD STRENGTH STEELS FOR COLD FORMING EN 10149-2 TOLERANCES ON DIMENSION AND SHAPE IN COMPLIANCE WITH EN 10051 STANDARDS.
MECHANICAL CHARACTERISTICS								CHEMICAL ANALYSIS %
QUALITY	NUMERICAL DESIGNATION	Re N/mm²		Rm N/mm²		A80% min Sp< 3 mm	A5% min Sp>= 3 mm	C max	Mn		Si max	P max	S max	Al max
		MIN	MAX	MIN	MAX				MIN	MAX
Ispadue® TE 001			320		410	30		0,07	0,25	0,4	0,03	0,015	0,015	0,07
Ispadue® TE 002			320		410	30		0,07	0,25	0,4	0,03	0,015	0,015	0,0015

PRO JINÉ, ZDE NEUVEDENÉ TYPY OCELI, PROSÍME, KONTAKTUJTE NAŠI KANCELÁŘ

OCELI S VYSOKOU MEZÍ KLUZU PRO VÁLCOVÁNÍ ZA STUDENA EN 10149-2 TOLERANCE ROZMĚRŮ A TVARU JSOU V SOULADU S NORMOU EN 10051
MECHANICAL CHARACTERISTICS
QUALITY	NUMERICAL DESIGNATION	Re N/mm²		Rm N/mm²		A 80% min Sp<3 mm	A 5% min Sp>=3 mm
		MIN	MAX	MIN	MAX
S315MC	1.0972	315	- - -	390	510	20	24
S355MC	1.0976	355	- - -	430	550	19	23
S420MC	1.0980	420	- - -	480	620	16	19
S460MC	1.0982	460	- - -	520	670	14	17
S500MC	1.0984	500	- - -	550	700	12	14
S550MC	1.0986	550	- - -	600	760	12	14
S600MC	1.8969	600	- - -	650	820	11	13
S650MC	1.8976	650	- - -	700	880	10	12
S700MC	1.8974	700	- - -	750	950	10	12

HIGH YIELD STRENGTH STEELS FOR COLD FORMING EN 10149-2 TOLERANCES ON DIMENSION AND SHAPE IN COMPLIANCE WITH EN 10051 STANDARDS
CHEMICAL ANALYSIS %
QUALITY	C max	Mn max	Si max	P max	S max	Al min	Nb max	V max	Mo max	B max	Ti max
S315MC	0,12	1,30	0,50	0,025	0,020	0,015	0,09	0,20	- -		0,15
S355MC	0,12	1,50	0,50	0,025	0,020	0,015	0,09	0,20	- -		0,15
S420MC	0,12	1,60	0,50	0,025	0,015	0,015	0,09	0,20	- -		0,15
S460MC	0,12	1,60	0,50	0,025	0,015	0,015	0,09	0,20	- -		0,15
S500MC	0,12	1,70	0,50	0,025	0,015	0,015	0,09	0,20	- -		0,15
S550MC	0,12	1,80	0,50	0,025	0,015	0,015	0,09	0,20	- -		0,15
S600MC	0,12	1,90	0,50	0,025	0,015	0,015	0,09	0,20	0,50	0,005	0,22
S650MC	0,12	2,00	0,60	0,025	0,015	0,015	0,09	0,20	0,50	0,005	0,22
S700MC	0,12	2,10	0,60	0,025	0,015	0,015	0,09	0,20	0,50	0,005	0,22

CONVERSION TO THE PREVIOUS STANDARDS
EN 10149	EU 149/2	SEW 092	NF A 36-231	NF A 36-203
	FeE275 TM	QStE 260TM		E 275 D
S315MC		QStE 300TM	E 315 D	E 335 D
S355MC	FeE355 TM	QStE 360TM	E 355 D	E 390 D
		QStE 380TM
S420MC	FeE420 TM	QStE 420TM	E 420 D	E 445 D
S460MC		QStE 460TM
	FeE490TM		E 490 D	E 490 D
S500MC		QStE 500TM
S550MC	FeE560TM	QStE 550TM	E 560 D
S600MC		QStE 600TM
			E 620 D
S650MC		QStE 650TM
S700MC		QStE 690TM	E 690 D